Auto Checking Fixture
Auto Checking Fixture
Auto Checking Fixture

Auto Checking Fixture

Item No:HTCK-003
Product size:101*46*40mm
Material:Aluminum, Brass, Bronze, Copper, Hardened Metals, Stainless steel, Steel Alloys

Send Inquiry

Product Introduction

Product Specification

Product Name	Auto Checking fixture
Item No.	HTCK-003
Product size	1014640mm
Material	Aluminum, Brass, Bronze, Copper, Hardened Metals, Stainless steel, Steel Alloys
Accuracy	0.005-0.1 mm or at your request
Color	Anodized, aluminum colors, black or individual parts can be customized to customer request
Surface treatment	Sand blasting, heat treatment, Sand blasting, heat treatment, etc
Machining Equipment	CNC,Grinding,EDM,Milling Machine,3DCMM,
Logo Method	Laser engraving, CNC engraving
Usage	Autoparts Checking Fixture, aerospace parts checking fixture,industry parts checking fixture
Packaging	Wooden box or at your request
Testing Facility	Three coordinate measuring machine,Micrometer,calipers
Lead time	15-20days after structure approved
Standard	ISO9001, export standard

The definition of Checking Fixture

A Auto checking fixture is a simple tool used by industrial production enterprises to control various dimensions of products (e.g. aperture, spatial dimensions, etc.), to improve production efficiency and control quality, and is suitable for mass-produced products, such as automotive parts, to replace professional measuring tools, such as smooth plug gauges, thread plug gauges, and O.D. gages.

Advantages of using Checking Fixture

Supplying auto checking fixtures as a value-added service can be highly beneficial, especially in industries where precision and quality control are crucial, such as manufacturing and automotive sectors. HT Tool&Die not only can provide stamping dies but also can provide checking fixtures;Here are some points that supplying checking fixtures can add value to our customers:

Quality Assurance: HT auto checking fixtures has strict quality control standards to follow in each production processing,we have ISO9001 system that can ensure our checking fixture can meet with customer requirement.

Time Savings：We have qualified project management and production management,so that each of our production procedures has been monitored and finished timely.This can increase the lead time efficiency in a great extent.

Cost Efficiency: By minimizing the need for manual inspection and rework, HT checking fixtures can help lower overall production costs for our customers.Our top management also monitored the material purchase and production procedures to control the cost,this will improve our cost competitiveness.

The base material of Auto Checking fixture

HT checking fixture are using standard and high quality base material for each of our checking fixtures so that will keep service life of checking fixtures.

Aluminum Bases that are more than 18" x 18" require a welded aluminum base, with 4 corner pads

Minimum, for stability. The height of the base is to be no more than 6" and no less than 4" in height,

and is to be normalized before use. Extra support pads may be required for longer bases.

Holding Fixtures: Structural steel tubing (welded and stress relieved) is to be used to construct the

holding fixture structure. Gussets or cross tubing must be incorporated to reinforce the main structure

Operation sequence of Checking fixture&gauges

Here are the procedures of auto checking fixtures:

Visual inspection to check part sharp edges ,cracks and burrs.
Using GO and NOGO pins to check the size of holes.
Make the parts is good to touch with the datum pin netpad and magnet
Adjusting the part keep it well contact nets and lacat it with X/Y1/Z1 and Y2/Z2.
Close clamp Z1,Z2,Z3.
Using the P1 pins to check the hole position.
Using the feeler and trim gauge to check the trim and surface as the color points.
Visually detect the edge of the material, it is qualified within +/-1.5 lines, and vice versa.
Recording results on the inspection sheet.
Unclamping and removing part.

Remark:The checking fixture/gauges must be under a dustless environment with stable temperature and humidity when they are used to examine the product.

Our workshop Equipment

We have in-house production processing,this is easy to control the quality and will get cost saving.

Certification

FAQ

Q: Who are we?

A: HT tool&die was founded in 2016 and it is located in Guangdong China,90% of stamping dies and checking fixtures are exported to oversea market and 10% of product are for domestic market. There are total 85 people in our factory.

Q: How can we guarantee quality?

A: Strict quality control management throughout the entire production process,Always a pre-production sample before mass production;Always final Inspection before shipment;

Q: what can you buy from us?

A: Metal Stamping Die, Casting Die,Metal Parts, Checking Fixture/Jigs

Q: Why should you buy from us not from other suppliers?

A: HT Tool and Die Co., Ltd. was founded in 2016, we are a domestic enterprise which is professional in tool and die manufacturing and design for household appliances and automobiles. we have a skilled and professional team with more than 100 key staffs

Hot Tags: auto checking fixture, China auto checking fixture manufacturers, suppliers, factory, Prototype Die, Auto Lower Body Parts, Electronic Components, Stamping Parts, metal stator and rotor, casting die progressive

No Information

Jig Checking Fixture