Stamping Die With High Production Efficiency And Good Quality

Stamping die is a special process equipment for processing materials (metal or non-metal) into parts (or semi-finished products) in cold stamping processing, called cold stamping die (commonly known as cold stamping die). Stamping - is a pressure processing method that uses a mold installed on a press to apply pressure to the material at room temperature to cause separation or plastic deformation to obtain the required parts.
Stamping is a pressure processing method that uses a stamping die to apply pressure to a material on a press at room temperature to cause plastic deformation or separation to obtain parts of the required shape and size. This processing method is usually called cold stamping.
Stamping die is a kind of process equipment for processing materials into workpieces or semi-finished products in stamping processing, and is the main process equipment for industrial production. The parts produced by the stamping die can use the rolled steel plate or steel strip produced in large quantities by the metallurgical plant as the blank, and no heating is required in the production, which has the advantages of high production efficiency, good quality, light weight and low cost. Cold stamping products can be seen everywhere in aircraft, automobiles, tractors, motors, electrical appliances, instruments, meters and daily necessities. Such as: stainless steel lunch boxes, dinner plates, cans, car covers, bullet casings, aircraft skins, etc. According to incomplete statistics, stamping parts account for about 60% in the automobile and tractor industry, about 85% in the electronics industry, and about 90% in daily hardware products.
A press is a machine used to press the material placed in the mold. Presses commonly used in stamping processing include mechanical presses and hydraulic presses.
A stamping part often needs to go through multiple stamping processes to complete. Due to the different shapes, dimensional accuracy, production batches, and raw materials of stamping parts, the stamping process is also diverse, but it can be roughly divided into two categories: separation process and forming process.
(1) Separation process The process of separating stamping parts and sheet metal along a certain contour line. For example: cutting, punching, blanking, notching, trimming, etc.
(2) Forming process The material undergoes plastic deformation without cracking to obtain parts with certain shape, size and precision requirements. For example: bending, deep drawing, flanging, bulging, shaping, etc.